Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

+[title] Extruder Wiring Bundle
+[* black] All of your Y carriage items should already be mounted, now you'll add the wiring harness for the hotend.
+[* black] There is a 36" zip tie inside the wiring bundle. One end of it slots into the wiring clip on the right side of the printer.
+[* black] Run the ends of all the wires through the grommet you installed.
+[* black] The other end gets zip tied to the wiring mount on the extruder mount.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added