Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Tony Pavlakis

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Anti-backlash Nut
-[* black] Install the anti-backlash nut onto the leadscrew.
+[* black] Prepare the anti-backlash nut for mounting onto the leadscrew.
[* black] Thread the bottom half (with the flange) down onto the screw until just the teeth are sticking up past the end of the leadscrew.
-[* black] Put the spring on onto the bottom of the leadscrew nut.
-[* black] Insert the top of the leadscrew nut, pushing down until the teeth interlock.
-[* black] Continue threading the nut on, until it's about 1/3 of the way down the leadscrew.
+[* black] Put the spring on the bottom of the leadscrew nut and hold it there until the next step.
+[* black] Insert the top of the leadscrew nut, pushing down until the teeth in the upper and lower parts interlock.
+[* black] Thread the nut assembly onto the leadscrew, until it's about 1/3 of the way down.
+[* black] Repeat the above steps for the other (2) leadscrews.