Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Anti-backlash Nut
-[* black] Anti-backlash Nut
+[* black] Install the anti-backlash nut onto the leadscrew.
+[* black] Thread the bottom half (with the flange) down onto the screw until just the teeth are sticking up past the end of the leadscrew.
+[* black] Put the spring on onto the bottom of the leadscrew nut.
+[* black] Insert the top of the leadscrew nut, pushing down until the teeth inerlock.
+[* black] Continue threading the nut on, until it's about 1/3 of the way down the leadscrew.