Skip to main content

Changes to D) Bottom Extrusions Assembly Introduction

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged
Category
RailCoreĀ® Mini Kit
Type
how-to
Title
D) Bottom Extrusions Assembly
Introduction
It's assumed that you're building a kit from Filastruder, and you've completed all previous sections. At the end of this section you should have a "bottom extrusions" assembly together for your RailCore frame.
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Author
Public
No

Tools

  • Allen Key x1 added.

Parts

  • Corner Cube x4 added.
  • 270mm 1515 Extrusion x4 added.
  • 5mm Acrylic Extrusion Spacer x16 added.
  • 81mm Acrylic Extrusion Spacer x24 added.
  • M3 Nut x57 added.

Flags

  • In Progress added.
  • User-Contributed Guide added.

Steps

Step #: 1
Before
After