You're viewing a previously published revision of this guide. View latest revision

Jun 15, 2020 - 01:06:27

Apr 07, 2023 - 07:04:30 Aug 08, 2021 - 05:08:11 Aug 08, 2021 - 05:08:45 Jul 19, 2020 - 08:07:51 Jul 19, 2020 - 08:07:14 Jul 19, 2020 - 08:07:09 Jul 12, 2020 - 10:07:11 Jun 20, 2020 - 07:06:38 Jun 20, 2020 - 12:06:44 Jun 16, 2020 - 06:06:28 Jun 15, 2020 - 01:06:52 Jun 15, 2020 - 01:06:56 Jun 15, 2020 - 01:06:38 Jun 15, 2020 - 01:06:30 Jun 15, 2020 - 01:06:21 Jun 15, 2020 - 01:06:43 Jun 15, 2020 - 01:06:45 Jun 15, 2020 - 01:06:33 Jun 15, 2020 - 01:06:36 Jun 15, 2020 - 01:06:18 Jun 15, 2020 - 01:06:27 Jun 15, 2020 - 01:06:16 Jun 15, 2020 - 12:06:22 Jun 15, 2020 - 12:06:16 Jun 15, 2020 - 09:06:15 Jun 15, 2020 - 09:06:59 Jun 15, 2020 - 09:06:24 Jun 15, 2020 - 09:06:03 Jun 15, 2020 - 09:06:53 Jun 15, 2020 - 09:06:41 Jun 15, 2020 - 09:06:29

Newer

R) Firmware, Config, and Smoke Test

Written By: Tony Akens (and one other contributor)

Comments: 4
Favorites: 0
Completions: 9

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 A Word of Warning

It can be tempting to rush ahead - you're almost done, after all, and you want to see your printer print. Don't rush these steps.
Read each step carefully, and follow the instructions closely, you'll save yourself a lot of time and headache.
If at any point you feel over your head here, stop and ask questions in the RailCore Discord (Best option) or RailCore Facebook group.

Step 2 Connecting to your Duet

Before Powering on the first time, You need to connect to your duet with a USB cable.

Before Powering on the first time, You need to connect to your duet with a USB cable.
Follow the instructions here for getting connected to your Duet. You can use YAT as suggested, or any other serial console program.
https://duet3d.dozuki.com/Guide/1.)+Gett...