You're viewing a previously published revision of this guide.  View latest revision

Older
Jan 26, 2020 - 12:01:07
Aug 06, 2021 - 10:08:35 Dec 29, 2020 - 02:12:21 Dec 29, 2020 - 02:12:41 Dec 29, 2020 - 02:12:24 Dec 29, 2020 - 02:12:18 Dec 29, 2020 - 02:12:08 Dec 29, 2020 - 12:12:32 Dec 29, 2020 - 12:12:28 Dec 29, 2020 - 12:12:29 Dec 29, 2020 - 12:12:21 Dec 29, 2020 - 12:12:43 Dec 29, 2020 - 12:12:36 Dec 27, 2020 - 05:12:19 Dec 27, 2020 - 05:12:14 Aug 24, 2020 - 04:08:39 Aug 24, 2020 - 04:08:32 Aug 24, 2020 - 04:08:07 Aug 24, 2020 - 04:08:55 Jun 20, 2020 - 12:06:55 Jun 15, 2020 - 04:06:48 Jun 15, 2020 - 04:06:26 Jun 15, 2020 - 04:06:58 Jun 05, 2020 - 02:06:27 Jun 05, 2020 - 02:06:09 Apr 09, 2020 - 03:04:06 Mar 21, 2020 - 11:03:53 Mar 21, 2020 - 09:03:19 Mar 21, 2020 - 09:03:04 Jan 26, 2020 - 01:01:23 Jan 26, 2020 - 12:01:27 Jan 26, 2020 - 12:01:17 Jan 26, 2020 - 12:01:54 Jan 26, 2020 - 12:01:45 Jan 26, 2020 - 12:01:07 Jan 26, 2020 - 12:01:08 Jan 26, 2020 - 12:01:24 Jan 07, 2020 - 10:01:16 Oct 28, 2019 - 09:10:12 Oct 27, 2019 - 07:10:48 Oct 27, 2019 - 07:10:24 Oct 27, 2019 - 07:10:08 Oct 27, 2019 - 07:10:54 Oct 27, 2019 - 07:10:35 Oct 27, 2019 - 07:10:20 Oct 27, 2019 - 07:10:51 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50
Newer

H) Leadscrews and Z Yokes

Written By: Tony Akens (and 3 other contributors)
  • Comments: 16
  • Favorites: 0
  • Completions: 28

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

  1. Install the (3) 1.8 degree Z steppers into the bottom panel using (4) M3 x 10mm button head bolts per stepper. The connectors should point towards the right side of the printer.

    • Install the (3) 1.8 degree Z steppers into the bottom panel using (4) M3 x 10mm button head bolts per stepper. The connectors should point towards the right side of the printer.

  2. Install the Leadscrew couplers onto the Z stepper shafts. The couplers should be fully seated and tightened.

    • Install the Leadscrew couplers onto the Z stepper shafts. The couplers should be fully seated and tightened.

  3. Install the (3) Z Yokes onto the Z carriages using (4) M3 x 12mm Button Head Bolts each. Note the orientation of the yokes in the pictures, so the hole for the leadscrew lines up over the stepper. Install the (3) Z Yokes onto the Z carriages using (4) M3 x 12mm Button Head Bolts each. Note the orientation of the yokes in the pictures, so the hole for the leadscrew lines up over the stepper.

    • Install the (3) Z Yokes onto the Z carriages using (4) M3 x 12mm Button Head Bolts each. Note the orientation of the yokes in the pictures, so the hole for the leadscrew lines up over the stepper.

  4. Anti-backlash Nut

    • Anti-backlash Nut

Author

with 3 other contributors

Tony Akens

Member since: 10/26/19

12,131 Reputation

21 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 2,750