You're viewing a previously published revision of this guide. View latest revision

Jan 26, 2020 - 12:01:24

Aug 06, 2021 - 10:08:35 Dec 29, 2020 - 02:12:21 Dec 29, 2020 - 02:12:41 Dec 29, 2020 - 02:12:24 Dec 29, 2020 - 02:12:18 Dec 29, 2020 - 02:12:08 Dec 29, 2020 - 12:12:32 Dec 29, 2020 - 12:12:28 Dec 29, 2020 - 12:12:29 Dec 29, 2020 - 12:12:21 Dec 29, 2020 - 12:12:43 Dec 29, 2020 - 12:12:36 Dec 27, 2020 - 05:12:19 Dec 27, 2020 - 05:12:14 Aug 24, 2020 - 04:08:39 Aug 24, 2020 - 04:08:32 Aug 24, 2020 - 04:08:07 Aug 24, 2020 - 04:08:55 Jun 20, 2020 - 12:06:55 Jun 15, 2020 - 04:06:48 Jun 15, 2020 - 04:06:26 Jun 15, 2020 - 04:06:58 Jun 05, 2020 - 02:06:27 Jun 05, 2020 - 02:06:09 Apr 09, 2020 - 03:04:06 Mar 21, 2020 - 11:03:53 Mar 21, 2020 - 09:03:19 Mar 21, 2020 - 09:03:04 Jan 26, 2020 - 01:01:23 Jan 26, 2020 - 12:01:27 Jan 26, 2020 - 12:01:17 Jan 26, 2020 - 12:01:54 Jan 26, 2020 - 12:01:45 Jan 26, 2020 - 12:01:07 Jan 26, 2020 - 12:01:08 Jan 26, 2020 - 12:01:24 Jan 07, 2020 - 10:01:16 Oct 28, 2019 - 09:10:12 Oct 27, 2019 - 07:10:48 Oct 27, 2019 - 07:10:24 Oct 27, 2019 - 07:10:08 Oct 27, 2019 - 07:10:54 Oct 27, 2019 - 07:10:35 Oct 27, 2019 - 07:10:20 Oct 27, 2019 - 07:10:51 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50 Oct 27, 2019 - 07:10:50

Newer

H) Leadscrews and Z Yokes

Written By: Tony Akens (and 3 other contributors)

Comments: 16
Favorites: 0
Completions: 28

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Z Stepper Installation

Install the (3) 1.8 degree Z steppers into the bottom panel using (4) M3 x 10mm button head bolts per stepper. The connectors should point towards the right side of the printer.

Install the (3) 1.8 degree Z steppers into the bottom panel using (4) M3 x 10mm button head bolts per stepper. The connectors should point towards the right side of the printer.